AMX MIO R-1 AUDIO FG147-04 - Manual (Page 26)

Using the MIO R-1 AUDIO Remote
22 MIO R-1 AUDIO
Alarm
When the alarm time is reached, the source selected will turn ON and the volume will ramp up to the set
volume and begin playing. At this point the source will behave normally.
Setting Alarm Time
1. Select Source & adjust the Volume to desired level.
2. Press "ALRM" button.
3. Key in 24 hour alarm time (use "?" to separate Hours and Minutes).
4. Press ENTER.
Example: Press "ALRM" + 6?30 + ENTER (alarm set for 6:30 AM).
Clearing Alarm For A Specific Zone
1. Press "ALRM" button.
2. Key in "00".
3. Press ENTER.
Clearing Alarm For All Zones
1. Press "ALRM" button.
2. Key in "00".
3. Press/hold ENTER.
FIG. 10 Alarm (ALRM) button
Alarm (ALRM) button
If a favorite has been set, the favorite will begin playing, else, the last station/CD will
begin playing.
To use the Alarm feature, a System Time must first be entered on the Main Controller,
via the Front Controller LCD.