Alpine VPA-B211A - Manual (Page 11)

10
-EN
DVD/Video CD Operation
(Optional)
Basic operations of an ALPINE DVD player/Changer
compatible with Ai-NET can be done from the unit's supplied
remote control. Refer to the Owner's Manual of the connected
DVD player/Changer.
Playing DVD/Video CD
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the DVD/TV/Video while driving the
vehicle. The driver may be distracted from looking
ahead and an accident could occur.
Install the VPA-B211A correctly so that the driver
cannot watch DVD/TV/Video unless the vehicle is
stopped and the emergency brake is applied.
If the VPA-B211A is not installed correctly, the
driver will be able to watch the DVD/TV/Video while
driving the vehicle and may be distracted from
looking ahead causing an accident. The driver or
other people could be severely injured.
SOURCE
REPEAT
8
9
g f
:/J/SEARCH
To display the DVD mode screen
To watch a video source, your vehicle must be parked with
the ignition key in the ACC or ON position. To do this, follow
the procedure below.
1. Push the foot brake to bring your vehicle to a
complete stop at a safe location. Engage the parking
brake.
2. Keep pushing the foot brake and release the parking
brake once then engage it again.
3. While the parking brake is being engaged the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmis-
sion lever in the Park position.
Now, the locking system for the DVD mode operation has
been released. Engaging the parking brake can reactivate the
DVD mode, as long as the car's ignition has not been turned
off. It is not necessary to repeat the above procedure (1
through 3), of “To display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure
of “To display the DVD mode screen.”
• If you try to activate the auxiliary device while driving, the
display will show the warning-PICTURE OFF FOR YOUR
SAFETY.
1
Press SOURCE to activate the DVD mode.
Playback starts.
2
Press either 8 or 9 to select a disc (DVD
changer connected).
Fast-forwarding/Fast-reversing
1
During playback, press and hold g (fast-
reverse) or f (fast-forward) .
2
Release g or f to return to normal
playback.
Finding the Beginning of Chapters or Tracks
During playback, press g or f.
The chapter/track switches each time the button is
pressed, and playback of the selected chapter/track
starts.
f: Press this to start playback from the
beginning of the following chapter or track.
g: Press this to start playback from the
beginning of the current chapter or track.
• Some DVDs do not have chapters.
Supplementary explanation
“Chapters” are divisions of movies or musical
selections on DVDs.
“Tracks” are divisions of movies or musical selections
on video and music CDs.