Alpine VPA-B211A - Manual (Page 22)

21
-EN
Installation
Velcro fastener Mounting
When mounting the unit with the Velcro fasteners, be sure to
choose a flat location.
Do not hang the unit from the bottom of the dashboard or rear
deck with the Velcro fasteners.
1
Remove the protective paper and attach two
pieces of velcro fastener to the bottom of the
VPA-B211A.
2
Check the position, and then fix the VPA-
B211A to the floor carpet.
Screw-down Mounting
1
Using the adapter as a template, hold it in the
mounting location and mark the holes to be
drilled. Before drilling, make sure that there
are no objects that could be damaged behind
the mounting surface.
2
Drill holes and secure the adapter with the
self-tapping screws (M4
× 14) supplied.
Velcro Fasteners
(Included)
Protective paper
Protective paper
Indication for iPod Mode
• The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
• The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
• There are no songs in the iPod.
- Download songs to the iPod and connect to the KCA-
420i.
• Communication error
- Turn the ignition key off, and then set to ACC or ON
again.
- Check the display by reconnecting between the iPod and
the adapter, using the iPod cable.
• Caused by the iPod Software Version not being compatible
with the optional adapter KCA-420i.
- Refer to the Owner's Manual of the optional adapter
KCA-420i, and update the iPod Software Version to be
compatible with the optional adapter KCA-420i.
Indication for AUX Mode
• The optional expansion box (VPE-S431) is not correctly
connected.
- Make sure the VPE-S431 is correctly connected, and the
cable is not bent excessively.
Specifications
External dimensions
Wide 180 mm (7-1/8")
Height 35 mm (1-3/8")
Depth 160 mm (6-1/4")
Weight 0.75 kg (1lb 10 oz)
NO iPod
NO SONG
ERROR
I/F BOX ERROR (AUX3 mode only)