Alpine VPA-B211A - Manual (Page 26)

25
-EN
• If the RGB input terminal and output terminal are reversely connected, be aware that the navigation mode will not be
displayed.
• If the unit and an ALPINE navigation system are connected, use an optional RGB cable, or the RGB cable supplied with the
navigation device. If the RCA cable is connected, the navigation and interrupt function are not controllable from the unit.
• An optional display interface box is required depending on the connected devices. However, the display interface box may not
be installable, depending on the vehicle or the connected device. For details, consult your nearest ALPINE dealer.
To CAMERA
Input Terminal
To RGB Input
Terminal 13P
To Video
Output
Terminal
RGB Cable
(included)
RGB
Cable
To RGB Output
Terminal 13P
To RGB Input
Terminal 13P To RGB Output
Terminal 13P
Connect the Navigation system or the Rear Camera
NVE-N852A/NVE-N871A
Navigation system
(Sold Separately)
Back-up camera
(Sold Separately)
VPA-B211A
CD Changer (Ai-NET)
(Sold Separately)
RCA
Extension
Cable
RCA Extension Cable (Included)
Ai-NET
Connector
Ai-NET Cable
AUX Audio Output
Terminal
AV-Interface Unit
(included with external
monitor)
External Front Monitor
(Sold Separately)
Video
Input
Terminal Audio Input
Terminal
AUX Video Output Terminal