AMX Modero MVP-5200i User Manual

Page 113

Advertising
background image

Programming

105

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Page Commands (Cont.)

@PPM

Set the modality
of a specific
popup page to
Modal or

NonModal.

A Modal popup page, when active, only allows you to use the buttons and features on that
popup page. All other buttons on the panel page are inactivated.
Syntax:

"'@PPM-<popup page name>;<mode>'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the popup page.
mode = NONMODAL converts a previously Modal popup page to a NonModal.

MODAL converts a previously NonModal popup page to Modal.

modal = 1 and non-modal = 0

Example:

SEND_COMMAND Panel,"'@PPM-Popup1;Modal'"

Sets the popup page ’Popup1’ to Modal.

SEND_COMMAND Panel,"'@PPM-Popup1;1'"

Sets the popup page ’Popup1’ to Modal.

@PPN

Activate a

specific popup
page to launch on
either a specified
page or the

current page.

If the page name is empty, the current page is used (see example 2). If the popup page is
already on, do not re-draw it. This command works in the same way as the ’Show Popup’
command in TPDesign4.
Syntax:

"'@PPN-<popup page name>;<page name>'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.

Example:

SEND_COMMAND Panel,"'@PPN-Popup1;Main'"

Activates ’Popup1’ on the ’Main’ page.
Example 2:

SEND_COMMAND Panel,"'@PPN-Popup1'"

Activates the popup page ’Popup1’ on the current page.

@PPT

Set a specific

popup page to

timeout within a
specified time.

If timeout is empty, popup page will clear the timeout.
Syntax:

"'@PPT-<popup page name>;<timeout>'"

Variable:

popup page name = 1 - 50 ASCII characters. Name of the popup page.
timeout = Timeout duration in 1/10ths of a second.

Example:

SEND_COMMAND Panel,"'@PPT-Popup1;30'"

Sets the popup page ’Popup1’ to timeout within 3 seconds.

@PPX

Close all

popups on all
pages.

This command works in the same way as the 'Clear All' command in TPDesign 4.
Syntax:

"'@PPX'"

Example:

SEND_COMMAND Panel,"'@PPX'"

Close all popups on all pages.

Advertising