AMX Modero MVP-5200i - Manual (Page 31)

Configuring Communication
23 MVP-5200i Modero Viewpoint Widescreen Touch Panel
Modero Setup and System Settings
All AMX Modero panels, including the MVP-5200i, feature on-board Setup pages. Use the options in
the Setup pages to access panel information and make various configuration changes.
Accessing the Setup and Protected Setup Pages
1. At any time, press down and hold the center button of the navigation wheel for 3-5 seconds. This
opens a release notice to release the button immediately to open the Setup page (FIG. 17).
2. Press the Protected Setup button. This opens a keypad for entry of the password to allow access to
the Protected Setup page (FIG. 18). Enter the device’s password and press Done to proceed.
For more information on the Setup and Protected Setup pages, refer to the Setup Pages section on
page 49 and the Protected Setup Pages section on page 59.
FIG. 17 Setup page
FIG. 18 Protected Setup page
The default password for the Protected Setup page is 1988, but this may be changed
at any time.