AMX Modero MVP-5200i - Manual (Page 67)

Protected Setup Pages
59 MVP-5200i Modero Viewpoint Widescreen Touch Panel
Protected Setup Pages
The Protected Setup page (FIG. 54) provides secured access to advanced panel configuration options,
including communication and security settings. The Protected Setup page is accessed through the Setup
page (please refer to the Setup Pages section on page 49).
To access the Protected Setup pages:
1. Press the center button of the navigation wheel and hold for 3 to 5 seconds to access the Setup
pages.
2. Select the Protected Setup button on the left side of the screen.
3. Enter the factory default password (1988) into the password keypad to access the page.
Features on the Protected Setup page include:
FIG. 54 Protected Setup page showing default values
Protected Setup Page
Navigation Buttons: The buttons along on the left side of the page provide access to secondary
Protected Setup pages (see following sections).
Back: Saves all changes and returns to the previous page.
Connection Status icon: The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Device Number: Opens a keypad used to view or change the device number of the panel.
Options: • Function Show - toggles the display of the channel port, channel code, level
port and level code on all touch panel buttons (see FIG. 55).
• Telnet - enables or disables the panel’s telnet server, allowing or preventing
direct telnet communication to the panel.
• Page Tracking - toggles the page tracking function. When enabled, the panel
reports page data to the NetLinx Master.
• Front Button Setup Access - activates the navigation wheel for accessing
the Setup and Calibration pages (see FIG. 54 on page 59). The default
setting is On.