AMX Modero MVP-5200i - Manual (Page 17)

Accessories
9 MVP-5200i Modero Viewpoint Widescreen Touch Panel
Accessories
Table Charging Station
The MVP-5200i device comes with the MVP-TCS-52 Table Charging Station (FG5966-1X) (FIG. 5),
which acts both as a charging station and a direct power connection. The charging station is available in
either white (FG5966-10) or black (FG5966-11).
Powering the MVP-TCS-52
The MVP-TCS-52 uses a PS3.0 power supply (included with the MVP-5200i touch panel or available
separately from www.amx.com) to provide direct power for the MVP panel both for standard functions
and for charging its internal battery.
1. Connect the terminal end of the PS3.0 power supply to the PWR connector on the bottom of the
MVP-TCS-52.
2. To prevent wear on the power supply cord and assure that the device’s base is in full contact with the
table surface, press the cord into the locking groove running across the bottom of the device.
3. Provide power to the MVP-TCS by connecting the PS3.0 cord to an external power source.
FIG. 5 MVP-TCS-52-GB Table Charging Station - Front
MVP-TCS-52 Specifications
Dimensions (HWD): • 8.0” x 4.75” x 3.5” (20.32cm x 12.07cm x 8.89cm)
Weight: • .65 lbs (.29 kg)
Rear Connector: • 5-pin charging connector on bottom of charging cradle.
Operating/
Storage
Environments:
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Included
Accessories
• MVP-TCS-52 Table Charging Station Quick Start Guide
(93-5966-02)
• PS3.0 Power Supply (FG423-44)
Other AMX
Equipment:
• MVP-5200i Modero Viewpoint Widescreen Touch Panel -Gloss Black
(FG5966-01)
• MVP-5200i Modero Viewpoint Widescreen Touch Panel - Gloss White
(FG5966-02)
• MVP-WCS-52: Wall Charging Station (FG5966-1X)