Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 13)

Plug & Play Wireless Day and Night NetworkCamera
13
cable unplugged condition and start the WiFi connection. After the WiFi is connected,
the IP CAM will connect to the Internet immediately.
Notes:
1. Remember that the WiFi connection will use a different IP address, therefore you
will need to do the "Auto Search” function in the CamView software again to find
the IP CAM after the WiFi has connected.
2. If you want to switch back to the wired Ethernet connection, just plug the Ethernet
cable into the IP CAM again. You do not need to disable the WiFi function on the
web pages.
Figure 2-9: Unplug the Ethernet cable to enable the WiFi function