Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 22)

Plug & Play Wireless Day and Night NetworkCamera
22
3.5. Advanced Network
In some special situations your network environment only provides a PPPoE
connection (ADSL service), with no NAT/router available. You will then need to set the
PPPoE settings on the "Advanced Network” page. Only the PPPoE username and
password are needed to let PPPoE work. After the "Save & Apply” button is clicked
the PPPoE function will work immediately. You can check the "Registration status” on
the "Information” page to see if the IP CAM is registered using the PPPoE connection.
Please be aware that the DHCP or static IP settings on the "Network” page can
work alongside the PPPoE connection. However, the PPPoE has higher priority, so if
the PPPoE is working, the IP CAM will use PPPoE to connect to the Internet.
The default setting is "Disable PPPoE”.
Figure 3-10: Advanced network settings page