Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 43)

Plug & Play Wireless Day and Night NetworkCamera
43
bps
Frame rate: 1~5, 10, 15, 20, 25, 30 fps
Audio Built-in microphone for audio monitoring
Audio compression:
MPEG2 audio, AMR-NB for 3GPP/ISMA
Security Web management username/password protection
Video display ID/password protection
WiFi WEP and WPA security mode
Installation,
management and
maintenance
Installation tool on CD and Web-based configuration
Automatic configuration backup and restore
Video management software-CamView for video access and
multi-camera management
Firmware upgrades via FTP
Minimum Web
browsing and
management
software
requirements
Built-in web server for standard web browser access
Pentium 4 CPU 1.0 GHz or higher, or equivalent AMD
1GB RAM
Supported protocols IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, IGMP, RTCP,
SMTP, SNTP, FTP, DHCP, UPnP, ARP, DNS, PPPoE, etc.
Accessories
(included)
Power adaptor, camera bracket, RJ45 Ethernet cable, quick
installation guide, CD with installation tool/software and
User's Manual, ID/Password card, antenna (for IP Cam
(
w
)
).
Video management
software
Surveillance application for viewing and archiving up to 16
cameras
Users Up to 20 simultaneous unicast users
(please see appendix B)
Unlimited users using multicast
Alarm and event
management
Events triggered by video motion detection
Notification/upload of JPEG images over FTP and/or email
Dimensions (HxWxD)
and weight
4.9" x 3.0" x 1.4" (125 x 75 x 35 mm), 9.9 oz. (280 g),
incl. camera bracket, excl. power adaptor
Approvals CE, FCC Part 15 Subpart B Class B
Wireless RF - CE, FCC Part 15 Subpart C
Power supply: FCC, UL EN 60950
Operating conditions Temperature: +32 ~ +122°F (0 ~ +50°C)
Humidity: 20 - 80% RH (non-condensing)