Monoprice PID 9205 Plug Play Wireless Day and Night Network IP Camera with Audio MPEG4 - Manual (Page 39)

Plug & Play Wireless Day and Night NetworkCamera
39
3.17. Safe Mode
If a critical error occurs, such as damaging the firmware by interrupting the update
process, the IP CAM will reboot into "Safe Mode". In this mode you will see the "Safe
mode” page (Figure 3-24) when you login to this IP CAM. If the IP CAM enters Safe
Mode, you should perform a firmware update operation immediately to recover the
system. While in Safe Mode the IP CAM will not send video to the CamView software,
however it can still be discovered in the "Auto Search" list. Perform the following steps
to recover from Safe Mode:
1. Use the CamView software to locate the IP CAM by clicking the "Auto Search”
item in the CamView software.
2. Login to the web configuration page of the IP CAM.
3. Upgrade the firmware from the "Upgrade” page.
Figure 3-24: Safe mode information page