Monoprice 8069 Portable Wireless-N 3G Router - Manual (Page 10)

Wireless Security Configuration
Please click “Wireless-> Security” located at the web management
interface, the following message will be displayed on your web browser:
Setup the wireless security and encryption to prevent from unauthorized
access and monitoring. Supports 64/128-bit WEP, WPA, WPA2 encryption
methods.
When you finish, click 'APPLY'.
Please click “Wireless-> WPS” located at the web management interface,
the following message will be displayed on your web browser:
you can establish a wireless connection between wireless adapter and
Router using either Push Button Configuration (PBC) method or PIN
method.
WPS: Enable / Disable
WPS Mode →PIN: If the new device supports Wi-Fi Protected Setup and
the PIN method, you can add it to the network by PIN.
WPS Mode →PBC: If the wireless adapter supports Wi-Fi Protected Setup
and the Push Button Configuration (PBC)
Step 1: Press the WPS button on the Router.
Step 2: Press and hold the WPS button of the adapter directly for 2 or 3
seconds.
Step 3: Wait for a while until the next screen appears. Click Finish to
complete the WPS configuration.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router
15 16