Monoprice 8069 Portable Wireless-N 3G Router - Manual (Page 4)

Setting up a Wireless Infrastructure Network
For a typical wireless setup at home (as shown above), please do the
following:
1. You will need broadband Internet access (a 3G USB Modem or Cable,
DSL-subscriber line into your home or office).
2. Consult with your 3G, Cable or DSL provider for proper installation of the
modem.
3. Connect the 3G USB Modem, Cable or DSL modem to the Wireless 3G-
N1 Router
4. Adding computers to the Wireless 3G-N1 Router.
Adding computers to the Wireless 3G-N1 Router
1. Log on to the computer.
2. Open Connect to a Network by right-clicking the network icon ( or )
in the notification area.
3. Choose the wireless network from the list that appears, and then click
Connect.
4. Type the network security key or passphrase if you are asked to do so,
and then click OK.
You'll see a confirmation message when you are connected to the
network.
5. To confirm that you added the computer, do the following:
Open Network by clicking the Start button ,and then clicking Control
Panel. In the search box, type network, and then, under Network and
Sharing Center, click View network computers and devices.
You should see icons for the computer you added and for the other
computers and devices that are part of the network.
Note : If you don't see icons in the Network folder, then network discovery
and file sharing might be turned off. For more information:
http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network
http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network
http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router
03 04
Getting Started