Monoprice 8069 Portable Wireless-N 3G Router - Manual (Page 6)

Setup the router mode
To Setup the router mode, please follow the following instructions:
Please click “Mode” located at the web management interface, the
following message will be displayed on your web browser:
Ø 3G Wireless Router Mode
Wireless and LAN port connect to local network; the 3G USB modem
connect to internet.
Ø Wireless Router Mode (Gateway)
Wireless connect to local network, The LAN port connect to internet.
Ø Wireless AP Mode
Wireless work for access point, LAN port connects to local network.
Ø Wireless Client Mode (Station)
LAN port connect PC or local network, Wireless work for a WAN port
connect to other wireless AP or router.
Click the APPLY button to Change your Router Mode.
LAN Settings
Please click “LANSetup” located at the web management interface, the
following message will be displayed on your web browser:
IP Address:
Enter the IP address of your Router or reset it in
dotted-decimal notation Wireless N Router (factory
default: 192.168.0.1).
Subnet Mask:
An address code that determines the size of the
network. Normally use 255.255.255.0 as the subnet
mask.
DHCP Type: Enable or Disable
Note:
1) If you change the IP Address of LAN, you must use the new IP Address
to login the Router.
2) If the new LAN IP Address you set is not in the same subnet, the IP
Address pool of the DHCP server will change accordingly at the same
time，while the Virtual Server and DMZ Host will not take effect until
they are re-configured.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router
07 08