Monoprice 8069 Portable Wireless-N 3G Router - Manual (Page 12)

Firmware Upgrade
The system software used by this router is called as 'firmware', just like
any applications on your computer, when you replace the old application
with a new one, your computer will be equipped with new function. You can
also use this firmware upgrade function to add new functions to your
router, even fix the bugs of this router.
To upgrade firmware, please follow the following instructions:
Please click 'Admin->Firmware-Upgrade' located at the web
management interface, then the following message will be displayed on
your web browser:
Click 'Browse' button first, you'll be prompted to provide the filename of
firmware upgrade file. Please download the latest firmware file from our
website, and use it to upgrade your router.
After a firmware upgrade file is selected, click 'UPGRADE' button, and the
router will start firmware upgrade procedure automatically. The procedure
may take several minutes, please be patient.
NOTE: Never interrupt the upgrade procedure by closing the web browser
or physically disconnect your computer from router. If the firmware you
uploaded is corrupt, the firmware upgrade will fail, and you may have to
return this router to the dealer of purchase to ask for help. (Warranty voids
if you interrupted the upgrade procedure).
Restore to Factory Default
If you think the network performance is bad, or you found the behavior of
the router is strange, you can perform a router reset; sometime it will solve
the problem.
To do so, please click 'Admin-> Factory-Defaults' located at the web
management interface, then the following message will be displayed on
your web browser:
Load Factory Defaults: Click this 'RESTORE…' button to remove all
settings you made, and restore the configuration of this router back to
factory default settings
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router
19 20