Monoprice 8069 Portable Wireless-N 3G Router - Manual (Page 7)

Connect to Internet (3G USB Modem)
Please click “Mode” located at the web management interface, select 3G
Wireless Router Mode. The Router will restart.
After Please click “3G→Setup” located at the web management interface,
You can configure parameters for 3G function on the screen below.
To use the 3G function, you should first insert your USB modem on the
USB port of the Router.
Interface description
Click the APPLY button to connect to your 3G network.
3G ISP Select 3G ,DWR/PWR series only have 3G dialup mode
APN Enter the APN (Access Point Name) provided by your ISP.
Pin Code Enter the Pin Code provided by your ISP.
Dialup number Enter the Dial Number provided by your ISP.
Username /
Password
Enter the Username and Password provided by your ISP.
These fields are case-sensitive.
Auto Dial-up
Connect automatically after the Router is disconnected. To
use this option, click the radio button.
Connect to Internet (Gateway)
Please click “Mode” located at the web management interface, select
Wireless Router Mode(Gateway). The Router will reboot.
After Please click “WAN→Setup” located at the web management
interface, Following example is for “PPPoE(ADSL)” WAN setting.
Enter the “PPPoE Username” and “PPPoE Password” that ISP provided
and leave the others. (The “Service Name” can be blank)
Click “Apply” button to save the settings then reboot the router.
After reboot, your router is now ready for Internet connection.
Wireless 3G-N1 Broadband Router Wireless 3G-N1 Broadband Router
09 10