Alcatel-Lucent OMNISWITCH 6800 - Manual (Page 117)

Managing OmniSwitch 6800 Series Stacks Monitoring the Stack
OmniSwitch 6800 Series Hardware Users Guide June 2007 page 3-37
CLI Commands Supported on Both Primary and Secondary
Management Modules
Although most CLI commands are executed when logged into the switch with the primary management
role, there is a group of commands that is supported when logged in to either the primary or secondary
management module. For a list of these commands, refer to the tables below.
Note. For detailed information on these commands, including command syntax options and definitions,
refer to the OmniSwitch CLI Reference Guide.
CMM Commands
reload
takeover
install
debug chassis auto-reboot
show running-directory
show reload
show microcode
Chassis Management and Monitoring Commands
show system
show hardware info
show chassis
show module
show module long
show module status
show cmm
show ni
File Management Commands
cd
pwd
mkdir
rmdir
ls
dir
rename
rm
delete
cp
mv
move
chmod
attrib
fsck
newfs
ed
vi
view
tty
show tty
rz
more
install
Switch Logging and Monitoring Commands
swlog
swlog appid level
swlog output
show log swlog
show swlog
debug ktrace
debug ktrace appid level
debug ktrace show
debug systrace
debug systrace appid level
debug systrace show
debug systrace show log
debug memory monitor
debug memory monitor show log
Memory Monitoring Commands
show log pmd