Alcatel-Lucent OMNISWITCH 6800 User Manual
Page 50
Setting Up a Stacked Configuration
OmniSwitch 6800 Series Chassis and Hardware Components
page 2-24
OmniSwitch 6800 Series Hardware Users Guide
June 2007
5
To provide added resiliency and redundancy, you must install the redundant stacking cable to connect
the top switch in the stack to the bottom switch. Connect the redundant cable now. Refer to the diagram
below for more information.
Redundant Connection Between Top and Bottom Switches
6
Once all stacking cable connectors are inserted, tighten the captive screws at the left- and right-hand
sides of each connector, as shown. Be sure not to overtighten the screws.
Tightening Stacking Connector Captive Screws
7
Now that all switches in the stack are connected, continue to
“Booting OmniSwitch 6800 Series
.