Pure Jongo A2 - User Guide - Manual (Page 10)

8
Power light states
The Power light on Jongo is also used to indicate the various states of Jongo, by colour.
Green (Pulsing three times) Indicates that Jongo is preparing to stream audio.
(Pulsing continuously) Indicates that Jongo is busy connecting to a
wireless network.
Green/Amber (Alternating) Indicates that you have connected your setup device
(smartphone/tablet) to Jongo Setup Manager in Wi-Fi Setup mode.
Red (Pulsing) Indicates that Jongo is booting up.
(Flashing continuously) Indicates that Jongo has an error (e.g.
Jongo has failed to connect to your Wi-Fi network).
Amber (Flashes twice) Indicates that you have tried to increase the volume
but Jongo is already at maximum volume.
(Flashes continuously (slowly)) Indicates that Jongo is in Wi-Fi
Setup mode.
(Flashes continuously (rapidly)) Indicates that Jongo is waiting for a
file before carrying out a software update.
Green/Red/Amber (Flashing colour cycle) Indicates that Jongo is carrying out a
software update.