Pure Jongo A2 - User Guide - Manual (Page 19)

17
Appendix
Connecting Jongo to your wireless network using Push
Button Configuration
You can use Push Button Configuration to connect Jongo to your wireless network if WPS is
supported by your router. Refer to your router user guide for more information on WPS.
1. Press and hold the
WiFi button on Jongo. Jongo’s Power light will pulse green while Jongo
attempts to connect to your network.
2. When Jongo’s Power light is steady green, Jongo has successfully connected to your network
using Push Button Configuration. You will now be able to start streaming tracks to Jongo. See
page 13.
Note: The WPS function may be disabled by default in some WPS-compatible routers. Consult your
router documentation for more information.