Pure Jongo A2 - User Guide - Manual (Page 18)

16
Changing Jongo’s name
If you prefer, you can change the name that the Pure Connect app and Bluetooth uses to identify
Jongo.
1. Type the name (e.g. ‘Jongo Bedroom 1’) that you want to assign Jongo in the
Your Jongo’s
Name box and click Change name. After Jongo’s name has changed, the Change name
button will grey out.
2. Push the WiFi button on the rear of Jongo to put Jongo back into Wi-Fi Connected mode (see
page 7 for more information).
Wireless network settings
See page 13 for more information on wireless setup.
Clearing all network settings
To clear all network settings, click the Clear all network settings button.
Note: You will need to reconnect to Jongo in Wi-Fi Setup mode to re-configure the network
settings.