Pure Jongo A2 - User Guide - Manual (Page 14)

12
Stage 3: Adding Jongo to your wireless network
Jongo will automatically scan for available networks. If you want to enter your wireless network
settings manually click
Advanced.
1. Select the name of your own wireless network from the list of Available networks.
2. If required, enter the security key used by your network and click Connect.
Jongo’s Power light will pulse green while Jongo attempts to connect to your network. When
Jongo’s Power light is steady green, Jongo has successfully connected to your network. You will
now be able to start streaming tracks to Jongo. See the following page.
If the Power light flashes red, there is a problem with Jongo’s network connection. Check that you
have entered your network settings correctly and repeat the steps outlined on the previous page.
Note: We recommend that you contact your IT department before attempting to connect Jongo to
a corporate wireless network.