Pure Jongo A2 - User Guide - Manual (Page 12)

10
2. Insert the connector of the mains power adapter into the socket on the rear of Jongo and plug
in to the mains supply. When Jongo is first plugged in, the Power light will pulse red. When
Jongo has finished booting up, the Power light will light green.
Jongo supports two wireless connection methods. See the following page to finish setting up your
wireless connection manually. If you have a router that supports WPS, you can use the simpler
Push Button Configuration method to connect Jongo to your wireless network. See page 17 for
more information.
5.5V DC
Line out Digital optical out
Digital coaxial out
R
L
5.5V DC
Jongo
A2