Pure Contour 200i Air - Manual (Page 14)

11
Manually connecting Contour to your wireless network
Stage 1: Connecting your setup device to Contour
In the first setup stage you need to establish a temporary connection between your
setup device and Contour. To do this, you need to create a temporary wireless
network to connect Contour to your iPod touch, iPhone, iPad or laptop.
Connecting using a temporary wireless network
1. Ensure that Contour is in Sleep mode or switched On.
2. Press the Wi-Fi Setup button on the back of the Contour for five seconds. This
will turn on Contour’s temporary wireless network. The Status LED will flash red
while the temporary wireless network starts up.
20 secs
After around twenty seconds, the Status LED will then flash green and blue.
20 secs
3. On your setup device (iPhone, iPod touch, iPad, laptop etc), the Contour
200i Air ****** wireless network should now be visible. Select this network. No
password is required.
4. Once you have connected to the Contour 200i Air ****** wireless network, you
can access the Contour Setup Manager on your setup device’s web browser.
Use Contour Setup Manager to add Contour to your own wireless network.
Note: ****** represents a six digit code that will be unique to each Contour,
which is based on the last six digits of Contour’s MAC address. The MAC
address can be found on the label on the base of Contour.