Pure Contour 200i Air - Manual (Page 26)

23
Update
The Update tab is only visible when you connect to Contour using a PC or Mac.
We recommend using automatic firmware updates for your Contour, which are
delivered via the Wi-Fi connection when Contour is in Standby or Sleep mode. If
the Status LED on Contour is static amber, Contour is checking to see if a new
version of firmware is available or is installing a new version of firmware. A firmware
update takes between six to eight minutes.
If you want to manually carry out a firmware upgrade, click Update. Contact Pure
Technical Support at http://support.pure.com for more information
Note: Do not power off Contour while a firmware update is taking place. The
Status LED will light Amber while a firmware update is taking place.
Note: The controls on Contour and the remote control will not function during an
automatic firmware update.
Note: If you experience any problems with automatic firmware updates, contact
Pure Technical Support at http://support.pure.com.