Pure Contour 200i Air - Manual (Page 25)

22
Advanced
The Advanced tab is divided into two main sections, Proxy Server settings and IP
address settings
.
Configuring Proxy Server settings
If your network uses a proxy server to connect to the internet, tick the Use Proxy
Server checkbox and enter your proxy server details. Click Connect at the bottom
of the window to save any changes made.
Configuring IP address settings
Contour supports both DHCP (default) and static IP address configuration. To use
DHCP, make sure that the DHCP checkbox is ticked and then click Connect.
To use a static IP address, make sure that the DHCP checkbox is not ticked and
configure the IP address settings in their respective fields. Click Connect to save
any changes made.
Note: Before applying any advanced settings, make sure that you select your
network SSID from the drop-down menu in the Connection tab, without clicking
the
Connect button. After applying the settings in Advanced tab, click the
Connect button at the bottom of the Advanced tab to change the network SSID
and the advanced settings simultaneously.
Status
The Status tab displays a summary of Contour’s firmware/hardware information
and also displays information about the state of the wireless connection.