Pure Contour 200i Air - Manual (Page 9)

6
Standby
Press to switch
between Sleep,
Standby and On.
See page 8.
Mute
Volume down
Volume up
Status
LED
See
page 6.
Front/top panel controls and connectors
Front panel Status LED
When Contour is powered, the Status LED is visible through the front speaker
mesh. The Status LED is also used to indicate the various states of Contour, by
colour.
Red Standby (bright) / Starting up (bright flashing) / Sleep (dimmed)
Blue iPod/iPhone/iPad dock is active (flashing indicates that the
connection to the docked product is preparing and also indicates
remote activity)
White AirPlay is active (fast flashing indicates remote activity) (slow
flashing indicates network connectivity problems)
Pink Aux In is active (fast flashing indicates remote activity)
Blue/Green (Alternate flashing) Temporary wireless network setup
Cyan Flashing indicates a firmware error
Amber Updating firmware
Note: For quick reference, there is a sticker on the base of Contour which indicates
the most common Status LED states.