Pure Contour 200i Air - Manual (Page 16)

13
Preparing Contour to connect
to an Ethernet network
1. Connect an Ethernet cable
from the Ethernet port on the
back of Contour to your router.
2. Insert the connector of the
mains power adapter into the
DC In socket on the rear of
Contour.
3. Plug in to the mains supply.
4. A network connection between your router and Contour will be established.
When the red Status LED on the front has stopped flashing, Contour is in Sleep
mode.
5. Contour is now ready to stream music using AirPlay with a wired connection.
18V DC
Typical Ethernet setup