Vaisala WAC155 - Manual (Page 40)

User's Guide ______________________________________________________________________
38 ___________________________________________________________________M210822EN-A
SETDEV
The SETDEV command sets the device ID of the transmitter. In a
multi-transmitter network, the device ID of each transmitter must be
unique.
SETDEV id <value><cr>
Example:
>setdev id A1
ID=A1
>
SETSPD
The SETSPD command configures the wind speed computation time
period.
SETSPD average <value><cr>
Example:
>setspd average 3.00
AVERAGE=3.00
>
SETDIR
The SETDIR command configures the wind direction computation
time period.
where
value = Specifies the new device ID for the transmitter. The
ID may contain up to 5 characters, including A-Z, a-
z, and 0-9. The ID is case-sensitive.
where
value = Wind speed computation time period in seconds. Range
0.25 ... 5.00 in 0.25 second increments (default 3.00)