Axis Communications 540+ - Manual (Page 60)

Setting Up - NetWare
60 AXIS 540+/AXIS 560
Notes:
Advanced Installation using AXIS NetPilot
Having installed your Axis Network Print Server print server in accordance with
the basic installation procedures described in Basic Setup with AXIS NetPilot, on
page 58, your Axis Network Print Server print server should now feature in the
‘Network Print Servers’ folder located in the AXIS NetPilot main window.
NetWare Network
Environment Window
The NetWare Network Environment window allows you to connect additional
print queues to your Axis Network Print Server as well as create new ones.
Follow the steps below to gain access to the NetWare Network Environment
window:
1. Select the required Network Print Server from the ‘Network Print Server’
folder.
2. Choose Network from the Setup menu or click on the Network icon on the
AXIS NetPilot’s toolbar.
3. If you are not logged on to your NetWare file server, a dialog box will ask you
to log on.
The Axis Network Print Server periodically updates the configuration by
scanning the NDS tree or, in the case of NetWare versions 3.x, the designated
file servers.
Connecting
Print Queues
Follow the steps below to connect a print queue to the print server port:
1. Open the NetWare ’Network Environments’ window.
2. Select the print server port you want to connect.
• The parameters entered during installation are not permanent; they can be altered at any
time according to your network printing requirements.
• No serious or permanent damage will be caused if you make a mistake during installation.
If you find, at any time, that printing is not satisfactory, the parameters can easily be
changed to tune the system to your requirements.
• For information on advanced functions, please refer to the AXIS Network Print Server
Technical Reference. You can download this or other technical information over the Inter-
net by accessing
www.axis.com