High Country Tek emc-3L - Manual (Page 55)

would equal 0 rather than 0.5 for any subsequent calculation. Also note that calculations in parentheses will be
performed first. For instance the expression
will equal zero while will equal 100.
Since the DVC does only unsigned math, negative numbers are not explicitly saved. So when you wish to
calculate a difference in two variables you will need to write code like:
If (a < b) then
Diff = b-a
Else
Diff = a-b
End if
P/N: 021-00163, Rev. A.0 - for V5.2 Tools Page | 55