Pivot cylinder installation – Summers 30' Superroller User Manual
Page 22
SECTION 2 - ASSEMBLY
1
1
2
2
A
A
B
B
-100
4/3/2007
9LR3042.iam/
A
8K9102
8D9108
8P6210
8D0350
8X0260
8X0306
8P6211
8P6020
8K9102
8D9108
8P6210
8P6211
NOTE: WINGS, DRUMS, WHEELS,
PIVOT ARMS (WHICH WERE
PREVIOUSLY INSTALLED) HAVE BEEN
EXCLUDED FROM THIS DRAWING FOR
EASE OF REPRESENTATION.
Pivot Cylinder Installation
PC 1. Loosely attach 8P6210 (green) and 8P6211 (black) as shown in the drawing below. Please
note the installation location of each part as they are different. Attach with the hardware
shown in Figure 9.
PC 2. Attach the bases end of the cylinders to each cylinder pivot with the hardware shown in Fig-
ure 9. Do not attach the rod end of the cylinder to the hitch at this point. The cylinders will
need to be plumbed to the hydraulic system and cycled to fill them with fluid and remove
any air.
2-12
Figure 9