Summers 30' Superroller - Manual (Page 3)

INTRODUCTION
This manual provides the following information about your Summers Land Roller.
SECTION CONTENTS
Section 1 – SAFETY explains important safety precautions and familiarizes the Operator with the
decals and their locations.
Section 2 – ASSEMBLY includes step by step assembly instructions for your Summers Land Roller.
Section 3 – LAND ROLLER OPERATION provides necessary information for the operation and ad-
justment of the machine.
Section 4 – MAINTENANCE covers recommended mechanical maintenance. TROUBLESHOOTING
provides a quick reference to solving problems. SPECIFICATIONS lists important dimen-
sions, capacities and other technical information.
Section 5 – PARTS
OTHER ITEMS OF IMPORTANCE
A. Summers Mfg. Co., Inc. strongly recommends that each Land Roller Operator READ and UNDER-
STAND the Operator’s Manual before using the machine. In addition, this Operator’s Manual should
be REVIEWED at least ANNUALLY thereafter.
B. It is the policy of this company in improve its products whenever possible and practical to do so.
We reserve the right to make changes or improvements in the design or construction of parts at any
time without incurring obligations to install such changes on products previously delivered.
C. Reference to “right” and “left” in this manual is determined when machine is viewed from the rear.
D. Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part
Number when ordering replacement parts from your Summers dealer. See back section of manual for
description of each Part Number.
E. WARNING – DO NOT ATTEMPT to raise machine into transport position if mud has built up on
rollers or if machine weight has been increased by any other means. Mechanical failure may occur.
F. Ability to safely operate the Summers Superroller is determined by both tractor horsepower and
weight. The minimum tractor weight for operating this implement is 16,000 lb. Minimum tractor
engine horsepower is 125. Dual tires or single tires set at maximum width are required for safe op-
eration of Land Roller.
G. Never tow this implement with less than an 16,000 lb. vehicle. Tongue weight in transport and
field positions 1150 lbs.
H. NEVER ALLOW anyone to work under Land Roller.
OWNER REGISTER
Name ____________________________________ Size _________________________________________
Address _________________________________
Serial Number _______________________________
City _____________________________________
State/Prov. ______________________________
Date Purchased ______________________________
Mail Code ________________________________ Dealer _______________________________________
(located by the hitch piece)
i