Kenwood K-323-BK - Manual (Page 11)

11
English
REC OUT (Recording output connector)
Connect a Kenwood digital audio player/recorder
with direct encoding function to the [REC OUT]
terminal on the rear of this unit.
The [REC OUT] connector outputs analog audio
signals. •
Kenwood digital audio recorder
with direct encoding capability
(MGR-A7, etc.)
To REC IN
Stereo mini-plug cord
(commercially available)
AUX IN (Auxiliary input connector)
Connect the audio output of the VCR, etc. to the
[AUX IN] terminals on the rear of this unit.
AUDIO OUT
VCR, etc.
DIGITAL IN (Digital audio input connector)
Connect the optical digital output of a digital
tuner, etc. to the [DIGITAL IN] connector on the
rear of this unit.
Set the digital audio setting of the connected
component to "PCM". •
Digital tuner, etc.
Optical digital output
(PCM signal)
Optical digital cable
(commercially available)
PHONES (Headphones connector)
Connect headphones with a stereo mini-plug to
the [PHONES] connector on the rear of this unit.
Connecting headphones mutes the sound from
the speakers.
CAUTION
A warning that excessive sound pressure from
earphones and headphones can cause hearing
loss.
Read B
efor
e U
se