Kenwood K-323-BK - Manual (Page 17)

17
English
1
Turn the system ON (OFF).
Press [ K].
Pressing the play/pause [ E] button of the
desired audio input source also turns the system
ON (page 15, "One touch operation function").
Pressing [ K] while the system is ON switches it OFF
(standby mode).
2
Select the audio source.
Press the play/pause button of the desired audio
source.
Press [TUNER]/[CD E]/USBE]/
[D.AUDIO E]/[DIGITAL IN]/[AUX].
Press [CD E]/[USBE] or [INPUT
SELECTOR].
Press [INPUT SELECTOR] on main unit to switch
the input source in order of [FM] R [AM] R
[D.AUDIO] R [AUX] R [DIGITAL IN].
With the CD/USB inputs, loading a disc or a USB
device in this unit selects the corresponding input
source automatically.
3
Set the source to be played.
How to load a disc
Hold the disc with the label side up and insert
it into the centre of the disc slot. "LOADING" is
displayed and the input source is switched to CD
. When the disc is loaded, " " lights and
playback starts automatically.
•
•
To eject the disc...
Press CD EJECT[ L]. "EJECT" is displayed and the
disc is ejected.
How to connect a USB device
Hold the device in the correct orientation and
insert the connector all the way. "READING" is
displayed and the input source is switched to USB
. " " lights and playback of the USB device
starts automatically.
To remove the USB device...
After stopping, set the system to the standby
mode and pull out the USB device.
4
Start playback.
Play the connected input source.
To stop playback of CD/USB/D.AUDIO...
Press [ F]/[STOPF] during playback.
■
■
■
Pla
ying music tr
acks