Kenwood K-323-BK - Manual (Page 20)

K-323
20
Playing a CD or audio fi le disc
Program playback
Music in a CD or audio fi le disc can be played in the
order programmed by the user.
Select the CD source and enter stop mode.
1
Select "PGM" (program play mode).
Press [P.MODE].
Each press switches the playback mode.
CD operation
Program play mode
PGM
lit
Normal play mode Not lit
Audio fi le disc operation
Folder play mode
Program play mode
PGM
lit
N
lit
Normal play mode Not lit
Display when the program mode is selected for a CD.
2
Select a track/ fi le.
CD operation
Select the track with [ G]/[H]
or [Numeric] buttons, and press
[ENTER].
When the 7th track is selected as the fi rst track of the
program.
•
Audio fi le disc operation
Select the folder with [ G]/[H]
or [Numeric] buttons, and press
[ENTER].
Select an audio fi le with [ G]/
[ H] or [Numeric] buttons, and
press [ENTER].
Display when fi le 10 in folder 003 is programmed as
the 1st fi le in the program.
If you committed a mistake in selection,
press[CLEAR] on the remote control unit before
pressing [ENTER] and restart selection.
Up to 32 fi les can be programmed.
3
Start playback.
Press [CD E].
To clear a track/ fi le from the program...
Stop playback and press [CLEAR] on the remote
control unit. Each press clears the last track/ fi le in
the current program.
To add a track/ fi le to the program after
programming...
If playback is underway, stop it and perform steps
2 and after.
To cancel the program mode...
Stop playback and press [P.MODE] to select the
normal play mode. The program is cleared at this
time.
The set program is cleared when the input source is
switched, the disc is ejected or the unit is switched
OFF.
•
■
■
■
•