Kenwood KDC-BT92SD - Manual (Page 30)

59 | KDC-BT92SD English | 60
SMS (Short Message Service)
Downloading the SMS
Download the short message (SMS) arrived at the
cell-phone so that it can be read on this unit.
1 Enter Bluetooth mode
Press the [
] button.
✍ You can also select from “Settings” in Menu List
mode.
2 Enter SMS download mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
> “SMS” > “SMS
Download”.
3 Start downloading
Press the [VOL] knob.
“Downloading” is displayed.
When the downloading finishes, “Completed” is
displayed.
4 Exit BT Settings mode
Press the [
] button.
⁄
• The cell-phone must be able to transmit the SMS using
Bluetooth. Setting on the cell-phone may be required.
If the cell-phone does not support SMS function, the
SMS download item in Function Control mode is not
displayed.
• When the SMS is downloaded from the cell-phone, the
unopened messages in the cell-phone are opened.
• The already-read and unread short messages can be
respectively downloaded up to 149.
SMS (Short Message Service)
The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.
¤
• To prevent car accidents, the driver should not read the
SMS while driving.
When a new message arrives
“SMS Received” is displayed.
The display disappears with any operations.
Displaying the SMS
1 Enter Bluetooth mode
Press the [
] button.
2 Enter SMS Inbox mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “SMS Inbox”.
A message list appears.
3 Select a message
Turn the [VOL] knob.
Each pressing of the [DISP] button switches
between telephone number or name and message
reception date.
4 Display the text
Press the [VOL] knob.
Turning the [VOL] knob scrolls the message.
Pressing the [VOL] knob again returns to the
message list screen.
5 Exit SMS Inbox mode
Press the [MENU] button.
6 Exit BT Settings mode
Press the [
] button.
⁄
• The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
• The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.
• The short message cannot be displayed during
downloading the SMS.
SMS reply setting
You can select a method to reply to the received
SMS.
1 Enter Bluetooth mode
Press the [
] button.
2 Enter SMS Reply mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “SMS” > “SMS Reply”.
3 Set to the desired Reply setting
Reply setting Display Operation
Auto “AUTO” Replies to the received SMS
automatically.
Manual “MANUAL” Sets whether to reply to the
received SMS.
OFF “OFF” Does not reply to the received SMS.
Turn the [VOL] knob to select Reply setting,
and then press the [VOL] knob.
4 Exit SMS Reply mode
Press the [MENU] button.
5 Exit BT Settings mode
Press the [
] button.
⁄
• Set the reply message according to <Return message
setting> (page 60) .
• When “Auto” is selected, a reply is made only to the
SMS from the phone whose phone number has been
registered in the phone book. If an SMS is received
from the phone whose phone number has not been
registered in the phone book, you can reply to it in the
same manner as you selected “Manual”.
• “Send Error” is displayed in case of failure in transmission
of the message which is automatically returned when
“Auto” is selected for Reply setting.
While “SMS Resend” is
still displayed on the display, selecting “YES” resends the
reply. Selecting “NO” cancels the reply.
MENU VOL DISP PRESET Return message setting
You can select a return message (language).
1 Enter Bluetooth mode
Press the [
] button.
2 Enter SMS Message mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “SMS” > “SMS Message”.
3 Set to the desired message (language)
Turn the [VOL] knob to select message
(language), and then press the [VOL] knob.
4 Exit SMS Message mode
Press the [MENU] button.
5 Exit BT Settings mode
Press the [
] button.
⁄
• If you select “User” from the message, the previously
created original message will be sent. Refer to <Creating
an original message> (page 61) .