Creating an original message, Sms manual reply, Creating an original message sms manual reply – Kenwood KDC-BT92SD User Manual
Page 31: Creating, Sms (short message service)
61
|
KDC-BT92SD
English
|
62
Creating an original message
You can create an original return message.
1
Enter Bluetooth mode
Press the [
] button.
2
Enter SMS Message select mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “SMS” > “SMS Message”.
3
Select the SMS message edit mode
Turn the [VOL] knob to select “User”, and then
press the [VOL] knob for at least 1 second.
4
Create a message
Operation type
Operation
Select the characters
Turn the [VOL] knob and press the [VOL]
knob.
Select the column
Turn the [VOL] knob and press the [VOL]
knob.
Select the character type Press the [DISP] button.
Delete the character
Press the [PRESET] button.
Delete the all characters. Press the [PRESET] button for at least
1 second.
5
To preview the message
Press the [VOL] knob for at least 1 second.
Pressing the [MENU] button, return to step create
a message.
6
Determine the message
Press the [VOL] knob.
7
Exit SMS Message select mode
Press the [MENU] button.
8
Exit BT Settings mode
Press the [
] button.
⁄
• You can enter letters using the remote control.
Example of entry:
To enter letter “A”, press the [2] button once, and then
press the [
¢
] button.
To enter letter “F”, press the [3] button three times and
then press the [
¢
] button.
To switch between letter types, press the [DIRECT]
button.
After entering all letters, pressing the [
38
] button allows
you to preview the message. Pressing the [
38
] button
again determines the message.
SMS manual reply
You can manually reply to the received SMS.
When a new message arrives
“SMS Reply” is displayed.
1
Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
Selecting “NO” cancels the SMS manual reply.
2
Select the desired message (language)
Turn the [VOL] knob to select message
(language), and then press the [VOL] knob.
3
Send the reply message
Press the [VOL] knob.
If sensing of the reply message fails, “Send Error”
is displayed. After this, selecting “YES” while “SMS
Resend” is displayed will resend the reply message.
Selecting “NO” will cancel the SMS manual reply.
Canceling the SMS manual reply
Press the [SRC] button.
SMS (Short Message Service)