Kenwood MGR-E8-B - Manual (Page 65)

English 65
■ To set the alarm timer
Press [
5]/[∞] to select “ON” and press [£/8].
To switch only the alarm timer off, select “OFF”.
Press [
4]/[¢] to select the hour or
minute.
Press [
5]/[∞] to vary the figure.
■ Press [
7/BACK] to return to the previous screen page.
6
Enter the timer setting
Press [
£/8].
7
Exit MENU mode
Press [MENU].
• The alarm timer is generated for about 30 seconds. The beep stops when any
button is pressed during generation.
• The alarm timer setting is canceled at the moment the alarm timer is activated.
• The alarm timer setting is maintained even after this unit is switched off.
• The alarm timer is not activated during recording or USB connection. If the set
time period is reached in the middle of recording or USB connection, the alarm
timer setting is canceled.
• The sleep timer setting is canceled when this unit is switched off.
B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd 65 B60-5825-08_00_MGR-E8(E)_English_1AJ6P1P0109--(XE0).indd 65 10/08/04 13:49 10/08/04 13:49