ATEN CS-1754 - Manual (Page 23)

2. Installation
15
6. For each Second Stage unit, plug the power adapter cable into its Power
Jack, then plug the power adapter into an AC source.
7. Plug the First Stage unit's power adapter cable into its Power Jack, then
plug the power adapter into an AC source.
8. Turn on the power to all the computers.
Note: The Power On sequence requires that all Second Stage units be
powered on first. After all the Second Stage units have been
powered on, then the First Stage unit must be powered on next. After
the Second and First stage units have been powered on, the
computers can be powered on.
Two Stage Installation Diagram
F/W UPGRADE
NORMAL RECOVER
F/W UPGRADE
NORMAL RECOVER
cs1754-1758.book Page 15 Friday, July 20, 2007 10:06 AM