ATEN CS-1754 - Manual (Page 31)

23
Chapter 4
OSD Operation
OSD Overview
The On Screen Display (OSD) is used to handle all computer control and
switching procedures. All procedures start from the OSD Main Screen. To pop
up the Main Screen, tap the [Scroll Lock] key twice.
Note: You can optionally change the Hotkey to the Ctrl key (see OSD
HOTKEY, page 27), in which case you would tap [Ctrl] twice. With this
method, the [Ctrl] keys must be on the same side (both left, or both
right).
The OSD incorporates a two level (Administrator / User) authorization system.
Before the OSD Main Screen comes up, a dialog box appears that asks you to
provide your Username and Password. If the Password Function has been set
(see SET USERNAME AND PASSWORD, page 29), you must provide them in
order to access the OSD Main Screen.
If this is the first time that the OSD is being run, or if the password function has
not been set, simply press [Enter] when the authorization dialog box appears.
The OSD Main Screen comes up in Administrator Mode, with access to all
functions.
When you invoke the OSD, a screen similar to the one below appears.
F1:GOTO F3:SET F7:SCAN X
F2:LIST F4:ADM F8:LOUT zzz
ADMINISTRATOR
LIST:ALL
PN
QV NAME
2 - 3 MAIL SERVER 1
1 - 6 - 8 ATEN INTL. 3
1 - 7 FAX SERVER 1
1 - 8 FAX SERVER 2
2 - 1 WEB SERVER 1
2 - 2 WEB SERVER 2
1 - 6 - 6 ATEN INTL. 1
1 - 6 - 7 ATEN INTL. 2
cs1754-1758.book Page 23 Friday, July 20, 2007 10:06 AM