Upgrade succeeded, Upgrade failed, Upgrade succeeded upgrade failed – ATEN CS-1754 User Manual
Page 55
Advertising
7. The Firmware Upgrade Utility
47
Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the
procedure was successful:
Click Finish to close the Firmware Upgrade Utility.
Upgrade Failed
If the upgrade failed to complete successfully a dialog box appears asking if
you want to retry. Click Yes to retry. If you Click No, the Upgrade Failed
screen appears:
Click Cancel to close the Firmware Upgrade Utility. See the next section,
Firmware Upgrade Recovery, for how to proceed.
cs1754-1758.book Page 47 Friday, July 20, 2007 10:06 AM
Advertising