Powering off and restarting – ATEN CS-1754 User Manual
Page 28
CS-1754 / CS-1758 User Manual
20
Powering Off and Restarting
If it becomes necessary to Power Off one of the switches, before starting it back
up you must do the following:
1. Shut down all the computers that are attached to it. If there are stations
cascaded down from it, all the cascaded stations and the computers
attached to them must be shut down, as well.
Note: 1. You must unplug the power cords of any computers that have the
Keyboard Power On function that are connected to the shut down
switches. Otherwise, the switches will still receive power from
the computers.
2. If the unit is operating under external power, unplug the power
adapter cable.
2. Wait 10 seconds, then plug the stations back in, starting with the lowest
stations in the cascade and working back to the station you originally shut
down.
3. After all the stations are up, power on the computers – starting with the
ones attached to the lowest stations in the chain, and working back to the
station you originally shut down.
cs1754-1758.book Page 20 Friday, July 20, 2007 10:06 AM