Burr King BK75 - Manual (Page 29)

Donaldson Company, Inc.
28
Step 6
A. Distribute filter envelopes evenly.
B. Finger-tighten wing screws.
Step 5
Step 5
A. Place one hand under the center of the EZ Filter
Pack.
B. Hold filter back against bottom of cabinet
ledge.
C. Push each slide latch over cabinet ledge.
D. Do not tighten wing screws at this time.
Step 7
A. Place support bar over center of EZ Filter Pack.
B. Insert small wing screws through holes in
support bar.
C. Hand tighten all wing screws.
Step 6
Step 8
A. Inspect filter seal.
B. Replace clean dust drawer.
C. Replace cabinet doors and tighten securely by
hand.
Step 8 Step 7