AMICA OKF621G EN - Manual (Page 6)

6
Electric supply requirements
It is necessary to check if the voltage value stated on the rating plate corresponds to the
electric supply parameters in the house and that the electric supply is marked as ~ (alter-
nating current). The ventilation hood is an electric equipment made in the 1st class of fire
protection and it must be connected to an outlet with working protection circuit.
Caution! If a supply cable becomes damage, it must be replaced by the staff of a
professional repair shop.
Our packaging are made of
environmentally friendly mate-
rials, which can be reused:
- The external packaging is made of card-
board/
foil
- The FCKW free shape of foamed polysty-
rene
(PS)
- Polyethylene (PE) foils and bags
ROZPAKOWANIE
DISPOSING OF ThE DEvICE
When disposing of the device,
do not bring it to regular munici-
pal waste containers. Instead,
bring it to electrical and electro-
nic waste recycling and reuse
center. A relevant label has been
put on the device, its instructions
manual, or on the package.
The device has been manufactured of re-
cyclable materials. By bringing old device to
recycling collection center, you show that you
care about nature.
Ask your local environmental care authority
for information on location of such facilities.
This piece of equipment is marked in accordance with the European Directive 2002/96/EC
on waste electrical and electronic equipment (WEEE).
WARNING: Before the ventilation hood is connected to the power supply network
and before its proper operation is checked, it is necessary to verify if the supply
cable has been installed properly and has NOT been crushed by the ventilation hood
during the assembly.