Wagner ProCoat 9185G - Manual (Page 6)

English 6
1. Assembly
Start
1. Insert the ends of the hose
bracket into the holes of the
handle as shown.
2. Remove the plug from inside
the hose fittings and remove the
cap on the outlet valve. Discard
both.
5. Thread the other end of the
hose to the spray gun. Hold
the gun with one adjustable
wrench, and tighten the hose
nut with the other.
4. Hold the port with an
adjustable wrench, and
tighten the hose with the
other.
3. Thread one end of the high
pressure spray hose to the
spray hose port.
You will need:
• Two adjustable wrenches
Note: It will be much easier to
attach the hose to the sprayer if
you uncoil it first.
1 2 3
5 4