Wagner ProCoat 9185G - Manual (Page 7)

English 7
Safety
Start
Pressure Relief
Procedure*
*Perform when instructed
Start Important Safety
Warning
Be sure to follow the Pressure Relief
Procedure when shutting the unit off
for any purpose. This procedure is
used to relieve pressure from the
spray hose. Failure to do so could
result in serious injury.
You will need:
• A waste bucket
Important Safety Warning
Be careful when handling the spray gun so you don’t
accidently spray yourself. The high pressure paint
stream could pierce your skin causing serious injury. If
an accident happens see detail procedures in the Safety
Information section on pages 2-3. See physician
immediately and bring this instruction manual.
4. Press and hold the red engine shutoff switch until
the engine stops running.
5. Unlock the spray gun. Briefly pull the trigger
to fully relieve pressure from the system.
Lock the spray gun.
1. Lock the spray gun. 2. Turn the DirectLink pressure
control knob to minimum.
3. Turn the PRIME/SPRAY knob
to PRIME.
4 5
1 2
SPRAY
PR
IM
E
3