Aalborg XFM Digital - Manual (Page 45)

42
Calibration Table: Gas Dependent Variables.
Note: Values will be available for selected gas only.
INDEX NAME DATA TYPE NOTES
100 GasIdentifer char[20] Name of Gas [If not calibrated = “Uncalibrated”]
101 FullScaleFlow float Full Scale Range in l/min
102 StdTemp float Standard Temperature
103 StdPressure float Standard Pressure
104 StdDensity float Gas Standard Density
105 CalibrationGas char[20]
Name of Gas used for Calibration
[If not calibrated=[“Uncalibrated”]
106 CalibratedBy char[20] Name of person who performed actual calibration
107 CalibratedAt char[20] Name of Calibration Facility
108 DateCalibrated char[12] Calibration Date
109 DateCalibrationDue char[12] Date Calibration Due
110 K_N
2
float Gas Parameters: K-factor relative to N
2
111 K_F1 float Reserved
112 K_F1 float Reserved
113 SensorTbl[0][Sensor Value] uint Index 0: Must be 120 (zero value) Do not Alter!
114 SensorTbl[0][Flow] float Index 0: Must be 0.0 (zero PFS) Do not Alter!
115 SensorTbl[1][Sensor Value] uint 10.0%F.S. A/D value from sensor [counts].
116 SensorTbl[1][Flow] float Actual Flow in PFS [0.1].
117 SensorTbl[2][Sensor Value] uint 20.0%F.S. A/D value from sensor [counts].
118 SensorTbl[2][Flow] float Actual Flow in PFS [0.2].
119 SensorTbl[3][Sensor Value] uint 30.0%F.S. A/D value from sensor [counts].
120 SensorTbl[3][Flow] float Actual Flow in PFS [0.3].
121 SensorTbl[4][Sensor Value] uint 40.0%F.S. A/D value from sensor [counts].
122 SensorTbl[4][Flow] float Actual Flow in PFS [0.4].
123 SensorTbl[5][Sensor Value] uint 50.0%F.S. A/D value from sensor [counts].
124 SensorTbl[5][Flow] float Actual Flow in PFS [0.5].
125 SensorTbl[6][Sensor Value] uint 60.0%F.S. A/D value from sensor [counts].
126 SensorTbl[6][Flow] float Actual Flow in PFS [0.6].
127 SensorTbl[7][Sensor Value] uint 70.0%F.S. A/D value from sensor [counts].
128 SensorTbl[7][Flow] float Actual Flow in PFS [0.7].
129 SensorTbl[8][Sensor Value] uint 80.0%F.S. A/D value from sensor [counts].
130 SensorTbl[8][Flow] float Actual Flow in PFS [0.8].
131 SensorTbl[9][Sensor Value] uint 90.0%F.S. A/D value from sensor [counts].
132 SensorTbl[9][Flow] float Actual Flow in PFS [0.9].
133 SensorTbl[10][Sensor Value] uint 100.0%F.S. A/D value from sensor [counts].
134 SensorTbl[10][Flow] float Flow in PFS. Should be 1.0 Do not Alter!