Aalborg XFM Digital - Manual (Page 56)

APPENDIX VI
53
NOTE: Follow Return Procedures In Section 1.3.
WARRANTY
Aalborg
7 Mass Flow Systems are warranted against parts and
workmanship for a period of one year from the date of purchase. Calibrations
are warranted for up to six months after date of purchase, provided calibra-
tion seals have not been tampered with. It is assumed that equipment select-
ed by the customer is constructed of materials compatible with gases used.
Proper selection is the responsibility of the customer. It is understood that
gases under pressure present inherent hazards to the user and to equip-
ment, and it is deemed the responsibility of the customer that only operators
with basic knowledge of the equipment and its limitations are permitted to
control and operate the equipment covered by this warranty. Anything to the
contrary will automatically void the liability of Aalborg
7 and the provisions of
this warranty. Defective products will be repaired or replaced solely at the
discretion of Aalborg
7 at no charge. Shipping charges are borne by the cus-
tomer.This warranty is void if the equipment is damaged by accident or mis-
use, or has been repaired or modified by anyone other than Aalborg
7 or fac-
tory authorized service facility. This warranty defines the obligation of
Aalborg
7 and no other warranties expressed or implied are recognized.
TRADEMARKS
Aalborg ® -is a registered trademark of Aalborg Instruments & Controls.
Buna ® -is a registered trademark of DuPont Dow Elastometers.
Kalrez ® -is a registered trademark of DuPont Dow Elastomers.
Neoprene ® -is a registered trademark of DuPont.
Viton ® -is a registered trademark of Dupont Dow Elastomers L.L.C.